Br23uboot100 Verified High Quality Instant

Do you need help a "verification failed" error?

| Error Message | Likely Cause | Solution | | :--- | :--- | :--- | | Bad hash ... | The U-Boot binary was corrupted during flash. | Re-flash the image. Check your SPI/eMMC connections. | | Signature check failed | The public key in U-Boot doesn't match the private key used to sign. | Rebuild the FIT image with the correct key pair. Ensure no key substitution occurred. | | No signature found in config | The ITS file omitted the signature node. | Revisit your ITS file. Enable CONFIG_FIT_SIGNATURE in U-Boot config. | | Unknown boot device | The bootloader can't find the storage medium. | Check your U-Boot bootcmd environment variable. Ensure br23uboot100 has proper SPI/eMMC drivers. | br23uboot100 verified

: Let the device charge for at least 2 hours and try turning it on again. Power Cycle Do you need help a "verification failed" error

Upon power cycle, the BR23 board will load the image and print to the serial console: | Re-flash the image

Users generally only encounter this message if they have connected a USB-to-TTL adapter