| Problem | Solution | |--------|----------| | Tool says “0x10105002” | Wrong firmware or USB cable too long. Use short cable. | | No device detected | Short NAND pins correctly; try different USB port (USB 2.0). | | Boot loop after flash | Reflash with “erase flash” and “erase bootloader” checked. | | WiFi/BT not working | You flashed RTL8723BS firmware but have SV6256P (or vice versa). |
Elias looked at the command prompt on his screen. It was flashing a new message. r29 mxq lp3 v23 firmware top
Connect the device to your PC via a USB-to-USB (Male-to-Male) cable while holding the Reset button (usually hidden inside the AV port) with a toothpick. | Problem | Solution | |--------|----------| | Tool
With the box off, hold the reset button (inside AV port) and plug in power. If you see a dead android with “No command,” you still can use the Amlogic USB Burning Tool. | | Boot loop after flash | Reflash