Kaeser Sd Card Write | Error Top ((exclusive))

Gently push the card in to release the spring lock, then pull it out.

The (Message No. 0300 W) on a Kaeser compressor typically occurs with the SIGMA CONTROL 2 system. It indicates that the controller is unable to save data to the inserted SD card. Common Causes & Solutions

: The physical lock switch on the side of the SD card may be in the "Lock" position. kaeser sd card write error top

: The controller cannot communicate with the card's file structure.

Insert the card back into the Top slot. Power the machine back on. The error should clear within 10 seconds as the controller creates a fresh log file. Gently push the card in to release the

Check the physical lock switch on the side of the SD card. It must be in the "unlocked" position for the controller to write data.

: The most common cause is the manual lock switch being engaged during insertion. It indicates that the controller is unable to

The SD card slot (X5) is located on the Sigma Control 2 unit.